Needle winding machine for Rotor

The equipment has a reliable and stable steel frame structure.
Winding and wire alignment are consistent, neat and in order, there is no slack coil in the winding, and no coil "collapse". During the winding process, he coil has no twisting defects, no crossing between wires, and no knotting, neither fly wire.
No intermediate forming for copper and aluminum wires. The fine arrangement and winding can be completed at one time. Layered wiring can also be carried out. Each layer of equipment can accurately adjust the wiring distance and the number of winding turns.
It only needs to replace the fixed mandrel and adjust the winding parameters to change between different stack height of the same lamination (about 10min). If switching between different laminations, it is necessary to replace the inner and outer protective molds and the fixed mandrel, and change the winding parameters (about 20min).
The machine offers optimized cycle time and lower noise level.